Condenser Coils

Coil construction is available for Condenser, Desuperheater, and Reheat applications.

 

Condenser - This coil takes the superheated vapor from the compressor and cools that vapor down to saturation.  It then completely condenses all of the vapor into liquid, and continues to subcool the resulting liquid to a desired temperature below saturation.

 

Reheat - This is a hot gas reheat coil which takes the superheated vapor from the compressor and cools the vapor down to saturation. It then continues to condense a requested percentage of that vapor to a liquid.

 

Desuperheater - This coil takes the superheated vapor from the compressor and cools that vapor down to a requested temperature above saturation.

 

 

 

Tubing: 3/8" or 1/2" O.D. Copper, 5/8" O.D. Copper, Stainless Steel or Carbon Steel
Circuiting: Standard one section, multiple sections
Rows: 1, 2, 3, 4, 5, 6, 8, 10, 12
Fin Surface: Sine Wave (corrugated), New Ripple (peak and valley) or Flat
Casing: Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum
Connections: Copper Sweat, Carbon Steel or Stainless Steel

 

 

 

 

  2009 Air Control Products Co, Inc.  All rights reserved.